Electrical Fuses & Fuse Links

Jointing Tech supplies electrical fuses and fuse links for utility, distribution, switchgear, house-service and street-lighting applications. The range includes current-limiting fuses, current-sensing fuses, fuse assemblies, dual-element fuse links, electricity supply fuses, house-service cut-out fuse links, J-type fuses, fuse wires and specialist HV products.

A fuse is a protective device that operates when current exceeds its designed limit, helping protect a circuit and connected equipment. Correct selection is essential: the fuse type, rating, voltage class, physical format and operating characteristic must all suit the equipment and system in which it will be installed.

Fuse selection should never be based on current rating alone. Confirm the system voltage, continuous current, prospective fault current, time-current characteristic, breaking capacity, physical dimensions, mounting arrangement and equipment manufacturer requirements. The correct product must also be compatible with the relevant cut-out, switchgear or fuse holder.

Current-limiting fuses are designed to limit fault energy in suitable applications, while other fuse types may be selected for sensing, service protection, street lighting or specific utility-network arrangements. Product references, tags, barrel sizes and mounting styles can vary, so match the replacement fuse exactly unless a competent engineer has specified an approved alternative.

Fuses are safety-critical electrical components. Replacement and installation should be undertaken by competent, authorised personnel using approved procedures, suitable PPE and appropriate isolation arrangements. Do not bypass a fuse or replace it with a product of a higher rating simply to stop repeated operation.

For assistance, provide the existing fuse reference and markings, voltage, current rating, equipment type, mounting arrangement and any relevant asset-owner or manufacturer specification.

FAQs

What information is needed to identify a replacement fuse?

Provide the manufacturer and product reference, voltage, current rating, physical dimensions, tag or mounting style, equipment type and a clear photograph where possible.

Can I use a fuse with a higher current rating?

Not unless it has been specifically approved by the equipment design or authorised engineer. A higher-rated fuse may not provide the required circuit protection.

What is a current-limiting fuse?

It is a fuse designed to limit the fault energy allowed through the circuit in suitable applications.

Are house-service and street-lighting fuses interchangeable?

No. Fuse types must be selected for the specific equipment, application and network requirements.

Need help identifying a fuse?

Contact Jointing Tech with the fuse markings, application and equipment details for support.

Fuses

Electrical Fuses & Fuse Links

FAQs

Quick Links